7108Reverse Thickener

Product technical specifications

product features

1. Broad applicability with good compatibility with various acrylic emulsions and VAE emulsions.
2. Exhibits excellent electrolyte tolerance and water-holding properties, allowing for compatibility with various aqueous adjuvants.
3. Easy to use, requiring no addition of pH adjusters, with the highest thickening efficiency achieved when the plasma pH is maintained between 6.5 and 7.5. Thickened solution can be directly added to water or solutions and stirred for use.
4. Good stability, with stable post-thickening condition. No adverse sequelae such as regurgitation or foul odor are observed.
5. Safety and Environmental Compliance: After SGS environmental testing, all indicators comply with EU standards.
6. High cost-effectiveness with minimal addition. The addition of 1% thickener to water can achieve a viscosity exceeding 40,000 mPa·s.

Recommended dosage

The typical dosage ranges from 0.5% to 1.0%, depending on the type of water, emulsion, solution, or other additives used, as well as the required viscosity.

apply

It is applicable to various acrylic acid emulsions, VAE emulsions, wallpaper base films, waterproofing agents, liquid roll materials, defoaming agents, wall primers, floor primers, watercolor paints, and other aqueous systems.

matters need attention

1. Do not let the product come into contact with water before use. 2. Stir thoroughly before use.         1. Do not let the product come into contact with water before use. 2. Stir thoroughly before use.

Packaging and Storage

25 kg / barrel, 19 0  kg / barrel, and custom packaging available upon request.

The container should be kept sealed, dry, and stored in a cool place, avoiding temperatures below 0°C and direct sunlight. Under appropriate storage conditions and temperatures, the shelf life of this product shall not be less than 12 months.

All data, including formulations, are authentic. However, customers must conduct experiments in their own laboratories or equipment for confirmation, and the company cannot make any commitments.

Customers must comply with local patent regulations. Suppliers have the right to modify their products and make any changes to specifications without prior notice.